Can you use a nail gun on PVC trim?
Nail guns can be used – PSI between 80- 100 dependent upon gun , nail , outside temperature and substrate. Use 7d trim screws to better control expansion / contraction. In temps under 40°F pre-drilling may be required, depending on the fastener used . These products must be glued and fastened to the substrate.
Can you use PVC trim inside?
Expanded profiles and improved product quality are making PVC a contender for indoor applications. Though gaining ground as an alternative to traditional wood, most industry estimates give cellular PVC only about 10% of the market for exterior trim .
How do you attach PVC trim to drywall?
To fasten the trim to the wall, I use 2 1/4-inch-long 15-gauge nails. On the interior of a home, nail holes in PVC can be filled with almost anything used with wood; Bond-and-Fill is a safe choice. To glue joints together, use PVC cement, since wood glues like Titebond II don’t work all that well with PVC .
What is the best caulk for PVC trim?
On PVC latex/acryllics adhere very well, no need for a primer. Although that stuff does expand/contract quite a bit so your best bet is going to be a paintable silicone for caulking. Try GE Groove caulk, or BM moorlastic trim and crown sealant .
Can you attach a storm door to PVC trim?
Yes you can , IF the brick mold is attached well-with screws preferably.
How do you cover nail holes in PVC trim?
Fill small holes with an exterior filler and lightly sand it smooth after it dries. Or use a paintable caulk and smooth it with your finger. Fill larger holes or damaged areas with auto body filler, and again, sand it after it cures.
Does PVC trim expand and contract?
Mike Sloggatt, a remodeling contractor in Levittown, N.Y., responds: While wood trim expands and contracts across its width with changes in moisture content, PVC trim expands and contracts along its length with changes in temperature.
Is PVC trim any good?
Builders like cellular PVC trim for a lot of reasons. It’s lightweight, durable, and waterproof. You don’t have to paint it; but it holds paint well. But there is one drawback: plastic trim doesn’t move because of moisture the way wood does, but it does move because of temperature.
Is PVC cheaper than wood?
Generally, your choices will be wood , composite, and cellular PVC decking. The first difference that you’ll probably notice is that wood is typically the least expensive, composite the second and cellular PVC the most expensive.
Is PVC stronger than wood?
In the end, plastic lumber reigns supreme in the game against traditional wood , aluminum and PVC . While each building material gave it their all, at the end of the day, plastic lumber’s advanced skill set, durability and project endurance outlasted the other contenders.
What paint will stick to PVC?
Plastic Specific Paints These paints have a special formulation that allows them to stick to PVC and other plastic products. The two products are: Krylon Fusion All-In-One™ Rust-O-Leum Paint for Plastic ®
What glue do you use for PVC trim?
Titebond Ultimate PVC Trim Adhesive and Sealant is a one-component, advanced polymer adhesive sealant designed for a variety of PVC trim, moulding, deck railing and beadboard installations.
Can PVC trim boards be glued?
PVC lumber can resemble wood surprisingly well. You can cut PVC lumber with conventional wood saws, but you glue boards together in the same way you glue PVC pipes: by using solvent-weld cement. The cement softens the plastic and actually fuses the boards you are joining into a single piece.