How can I make my cinder block walls look better?
Paint goes a long way toward making a cinder block wall look better . Paint it to match the rest of the rooms to make the block wall blend in, or paint it with a wall -sized mural to turn the wall into a feature.
Can you put drywall over cinder block?
There’s just one drawback: Concrete and cinder blocks are porous, meaning moisture travels through like oil up a lamp wick. Attaching drywall directly to block is looking for trouble; it will eventually mildew, mold and ruin.
What can I use to cover concrete walls?
Hang ceiling to floor heavy, light colored drapes or curtains. I know that you don’t want paint, but masonry sealer, such as ThoroSeal or Sunny Dry is the least expensive best looking way to go. Up from that is epoxy basement paints but I have had good luck with portland cement based paints such as these.
How do you cover concrete block walls in a basement?
If your concrete – block basement walls are dry and free of efflorescence or mold, you can seal them with a masonry sealer or all-purpose water-base primer-sealer and paint with a high-quality latex paint. Paint is an easy way to make the basement feel warmer, brighter, and more welcoming.
How do you hang things on a cinder block wall without drilling?
Hardwall hangers are picture hooks intended specifically for difficult surfaces like concrete block and brick walls . The plastic hook attaches to the wall with small metal nails that pound into the wall surface with a hammer.
How do you insulate a cinder block wall?
If you intend to live in the room, the best way to insulate the block wall is to build the wall out with furring strips and then insulate between them. The process is similar to framing a standard wall , except the wall studs typically fit flat along the block wall .
How do you attach wood to a cinder block wall?
Drill right through the wood and into the concrete with a masonry bit and hammer drill. Use a depth stop to get the correct depth and then blow the dust out of the hole with a turkey baster (don’t use your breath, because the dust will blow back in your face).
Can you insulate a cinder block house?
Answer: You can ‘t. And there is no effective way to fill the voids in an existing concrete – block wall. Your only option is to cover the inside of the exterior walls with a continuous layer of insulation , as though you were insulating a basement wall.
How do you make a concrete wall look good?
6 Ways to Dress Up a Concrete Garden Wall Add Plants and Metalwork. Mimic the Texture of Rough-Sawn Wood. Hang Vertical Planters. Customize with a Mural. Apply a Textured Overlay. Embed Boulders.
How do you hide a block wall?
Install several trellises along the wall to hind the cinder blocks . The trellis alone will hide the plain surface, but you can plant climbing plants at the base of the trellises to add some color to the space. There are several styles of trellis available, including wood, lattice and vinyl.
What kind of paint do you use on cinder block basement walls?
The BEHR 5 gal. Basement and Masonry Waterproofing Paint with NanoGuard technology is an interior/ exterior waterproofer specially designed for porous concrete and masonry surfaces.
Should you put plastic on basement walls?
A common question people have when finishing a basement is ” Should I use visqueen or plastic sheeting on one side or the other of the framed basement walls ?” The answer is no. Plastic will prevent moisture from moving through the wall . So moisture can and will get inside the wall .
What can I put on my basement walls to stop water?
DO apply a masonry waterproofing product to bare interior basement walls . If your foil test showed that water is soaking through your basement walls and leaving them wet, seal the interior of the walls with a high-quality waterproof paint, such as DRYLOK White Extreme Waterproofer (available from Home Depot).